ds9093x 1 of 3 020998 features key ring mount version: - ds9093f snap-in fob for use with f5 microcan tm - ds9093n angled fob for use with f5 microcan - ds9093a snap-in angled fob for use with f5 microcan two permanent mount versions: - ds9093s allows an i button to be easily and permanently attached to an object using screws or rivets (f5 microcan) - DS9093P has a locating pin and a single mounting hole for permanent attachment (f5 microcan) pre-punched hole mount: - ds9093ra lock ring firmly fastens f5 package - ds9093rb flange enlargement provides additional flange surface area if needed ds9093a key ring mounts ds9093f ds9093n ds9093x i button tm mount products www.dalsemi.com
ds9093x 2 of 3 020998 description the ds9093 i button mount products offer the user low-cost fixtures that hold an i button for thumbpad applications or permanent attachment to an object. the ds9093f plastic snap-in fob offers the simplest way to mount an i button for applications that require only momentary contact. the fob can be attached to a key ring for carrying. do not apply solvents or adhesives to this fob. this might affect the mechanical strength and reliability. the ds9093n angled fob is an alternate way to mount an i button for applications that require only momentary contact. due to the different mounting technique, the ds9093n can be used with the f5 microcan only. the i button is inserted into this fob by press-fitting. for permanent mount, the i button can be locked by a ds9093ra lock ring. the ds9093a is very similar to the ds9093n. it has about the same size as the ds9093n and can be used with the f5 microcan only. the i button is inserted by press-fitting the flange of the microcan into the cavity of the fob. in contrast to the ds9093n, no additional parts are needed for permanent mounting. the ds9093a is available in black, blue, green, red and yellow. through-mount for containers the ds9093s and DS9093P allow the user to permanently attach an i button to an object with one or two screws, rivets, etc. the plastic plate is designed with an inset that accommodates the flange of the f5 package and allows for flush mounting. a protective wall is provided along the sides of the plate to reduce incidental damage to the i button.
ds9093x 3 of 3 020998 the ds9093ra lock ring is a stainless steel fastener which provides an inexpensive method for firmly attaching an i button to any item with a pre-punched hole. the ibutton is inserted through the hole and is restrained by the flange on the i button. the ds9093ra lock ring is crimped onto the portion of the i button which protrudes through the hole. the optional ds9093rb flange enlargement is a thin stainless steel washer that provides additional surface area to improve retention of the i button in materials that are very thin or flexible. the ds9093rb is formed with a slight dome to improve the gripping force exerted onto the pre-punched material. the domed side of the washer should face the flange of the i button , the flat side should face the material. ds9093ra ds9093rb ds9093ra and ds9093rb application
|
